Crojfe

Search

Pajek Luka, MSc

Impact of Using the Axe in Motor-Manual Felling on Hand-Arm Vibrations

volume: issue, issue:

Although the axe is the feller's main tool alongside the chainsaw, it has been neglected in previous studies from the point of view of occupational health and safety. The aim of the study was therefore to determine the share of axe use in the productive time of motor-manual felling and the contribution of the axe to the overall exposure of the feller to hand-arm vibration (HAV). The study was conducted during the felling of 43 spruce and fir trees with a diameter at breast height (DBH) of 11 to 90 cm using a Stihl 361 C BQ chainsaw and a conventional felling axe. The results showed that the proportion of productive time spent in axe-based operations (wedging and debarking the stump) was between 5 and 13% for spruce trees and between 2 and 7% for fir trees. The measured weighted HAV value (RMS VTV) for wedging was 6.99 m/s2 and 5.49 m/s2 for debarking the stump, which was 1.2 to 1.7 times higher than during chain-saw based operations. The contribution of the axe in the total HAV load was between 13% and 23% for spruce trees and between 6% and 18% for fir trees. The research results show that axe use contributes significantly to a feller's overall exposure to HAV, which means that the axe should be replaced by other tools or methods when felling, and research should be extended to different types of felling axes and alternatives.

Impact of Using the Axe in Motor-Manual Felling on Hand-Arm Vibrations

volume: 48, issue: 1

Although the axe is the feller's main tool alongside the chainsaw, it has been neglected in previous studies from the point of view of occupational health and safety. The aim of the study was therefore to determine the share of axe use in the productive time of motor-manual felling and the contribution of the axe to the overall exposure of the feller to hand-arm vibration (HAV). The study was conducted during the felling of 43 spruce and fir trees with a diameter at breast height (DBH) of 11 to 90 cm using a Stihl 361 C BQ chainsaw and a conventional felling axe. The results showed that the proportion of productive time spent in axe-based operations (wedging and debarking the stump) was between 5 and 13% for spruce trees and between 2 and 7% for fir trees. The measured weighted HAV value (RMS VTV) for wedging was 6.99 m/s2 and 5.49 m/s2 for debarking the stump, which was 1.2 to 1.7 times higher than during chain-saw based operations. The contribution of the axe in the total HAV load was between 13% and 23% for spruce trees and between 6% and 18% for fir trees. The research results show that axe use contributes significantly to a feller's overall exposure to HAV, which means that the axe should be replaced by other tools or methods when felling, and research should be extended to different types of felling axes and alternatives.