Rosińska Martyna, MSc.

Silver birch (Betula pendula Roth) is a popular tree species forming stands in nearly the whole of Europe. In Poland, birch is one of the most representative broadleaved species growing on rather poor soils, very often as a mix species with Scots pine (Pinus sylvestris L.). In Central Europe, birch forms trunk often with sweeps, and at the older age with thick branches. Due to that, a harvester thinning operation in birch stands can be challengeable when trying to process logs from the top part of trees, which can finally impact on productivity. The objective of this research was to determine harvester productivity for birch with particular attention to production of logs from the top part of a tree. The research was carried out in stands of North and North-West Poland. All together 21 tests were completed in 16 stands, in which 9 harvesters were used (8 different models). The mean diameter of harvested trees was 23.7 cm with the mean height of 21.7 m. Obtained productivity without delays was on average 21.98 m3 h-1 and varied from as low as 5.14 to maximum 44.66 m3 h-1, and depended mainly on harvested tree size. It was also confirmed that top diameter of the last log depended on diameter at breast height (DBH). The model developed based on that relationship can be used for prediction of biomass volume from birch stands when harvesters are used for thinning.

In Central European conditions, harvester use becomes more popular for broadleaved tree species, though there are still some difficulties with effective delimbing of satisfactory quality. Considering these issues, economic aspects are ultimately crucial when deciding on the use of harvesters and assessing the effectiveness of their productivity. The objective of the present research was to apply different harvesters in thinning of alder stands to determine their productivity level focusing on the use of tree trunk for logs. The study was carried out in alder stands under thinning where five different harvesters were used in nine stands, five of which were of coppice origin. Additionally, in six cases, harvesting was done after the growing season and in three cases during the growing season, when trees were covered with leaves. An average productivity was 14.42 m3 PMH0-1, with maximum values of 24.34 m3 PMH0-1 in a coppice stand, and 23.66 m3 PMH0-1 in a planted stand. Delimbing was carried out in the tree crowns with the mean diameter as small as 7.9 cm under bark, which shows very good use of the tree trunk for logs. It was also established that the thicker the tree, the bigger the top diameter of the last log, leading to bigger biomass production, e.g. for energy purposes, but also with smaller effectiveness of log processing.